Cure-It is a fully-formulated, wet-laid, GRP waterproofing system.
Material features
-Materials are specially formulated for roofing applications
-20 year guarantee on materials
-Fast ‘wet-out’
-Low styrene emission
-High flexibility
-Adjusted for seasonal variations in temperature
-Good inter-laminar adhesion
-Includes technical support
-Supplied pre-pigmented mid-grey (BS 00 A 09)
-Any colour available
-Fire retardant to BS476-3 Ext.F.AB (no restrictions on usage) F.AA rating is available with the coated non-slip finish.
Longevity
The Cure-It roofing system materials (Roofing Resin, Roofing Topcoat, Roofing Edge Trims, Roofing Catalyst, Chopped Strand Mat) will remain within the specification of the Cure-It Material Safety Data Sheet when stored correctly and will form a structural waterproof membrane that will remain watertight for a period of 20 years from the date of manufacture when installed as specified in the conditions set out in the Cure-It guarantee.
A flat roofing system comprising of a Cure-It GRP laminate with Cure-It topcoat when tested to BS 476-3 : 2004 was designated EXT.F.AB (no limitations on use.)
Resistance to wind uplift
The Cure-It GRP roofing system is fully-bonded to the roof substrate. The system will be resistant to any wind uplift that could reasonably be expected during the product’s lifespan.
Areas of usage
The Cure-It waterproofing system can be used for waterproofing applications of almost any size or complexity.
Warm roof specification
The Cure-It system can be specified to comply with current part ‘L’ regulations.
Resistance to foot traffic
In standard 450g/m2 specification the Glass Guard system will be resistant to any level of foot traffic that it could reasonably be subjected to during its lifespan. 600g/m2 specification is available for applications subject to heavy foot traffic such as walkways/balconies.
Finish options
The Cure-It waterproofing system is supplied to BS4800 00 A 09 mid grey. There are two non-slip options available: coloured non-slip (granulated non-slip slate coating applied at 1000g/m2) and coated non-slip (granulated non-slip slate coating applied at 1500g/m2).